Air Driven Classic Machine – Mark II

The Air Driven Classic Machine type FPL/R has a built-in air-motor and should be driven by a compressed and oil mist lubricated air unit. NOTE! The built-in air-motor may be damaged, if operated with non-lubricated air.classic-polishing-machine

Connection: The Diprofil quick-coupling HSL-M and fog lubrication unit MFB should be used for connection to your compressed air system. NOTE! Protect the air inlet from dust and dirt, when not in operation.

The Air Driven Classic Machine is available with a Ø 6.4 mm tool-holder.

Technical Data

Item No. FPL/R

Speed (maximum): 8.000 strokes/min.
Speed (recommended): 5.000 – 6.000 strokes/min.
Stroke length: 0 – 6 mm (recommended 0.5 – 3 mm).
Tool-holder: Ø 6.4 mm (suitable for tool shanks Ø 2 – Ø 6,4 mm).
Weight of inserted tool: Maximum: 26 g. Recommended: 1-15 g.
Applied feed force: 2-12 N (depending on inserted tool type and dimension).
Machine weight: Approx. 740 g.
Oil consumption: minimum 30 mm³/min. at maximum speed (about 2 drops/min).
Air pressure: 4 bar (58 psi).
Air consumption: Approx. 65 l/min at 8. 000 strokes/min.
Noise level: Not exceeding 70 dB(A) at 7.000 strokes/min. According to ISO 15744.
Vibration levels: See information on page 14 in the operation guide.

For more information about vibration levels when using certain tools at different speeds and stroke lengths, please see the corresponding operation guide. Frequency weighed hand/arm vibration principally in accordance with ISO 28927-8.

 Click on the image below to see the spare parts list (in PDF-format) for Item No. FPL/R:

spare-parts-diprofil

Share This:
Facebookgoogle_pluslinkedinmail