Micro-Motor Driven Di-PRO® Machines – Mark II

The FXM-N and FXM/EJ-N models are driven by a built-in micro-motor, which is connected to, and controlled by, the power units DIPROFIL DPU-3 or TPU-20 or by other corresponding units. Output: DC 0-32V. (The needed voltage at a certain rpm is depending on the micro-motor and the power unit).

The micro-motor driven Di-PRO® machines are available with a Ø 6.4 mm tool-holder.Di-PRO-polishing-machine

FXM-N (Diprofil connector)

Connection   Item No.
Diprofil connector FXM-N
Eneska 3-1 connector FXM/EJ-N

Technical Data

Speed (maximum): 7.000 rpm
Speed (recommended): 5.000 – 6.000 rpm
Stroke length: 0 – 6 mm (recommended 0,5 – 3 mm) NOTE! At stroke lengths exceeding 4 mm a maximum speed of 5.000 rpm is recommended.
Tool-holder: Ø 6.4 mm (suitable for tool shanks Ø 2 – Ø 6,4 mm)
Weight of inserted tool: Maximum 34 g. Recommended 1-15 g.
Applied feed force: 2-12 N (depending on inserted tool type and dimension).
Machine Weight: Approx. 860 g.
Noise level: not exceeding 75 dB(A) at 7.000 rpm
Vibration levels:  please see page 17 in the operation guide

For more information about vibration levels when using certain tools at different speeds and stroke lengths, please see the corresponding operation guide. Frequency weighed hand/arm vibration principally in accordance with ISO 28927-8.

Click on the images below to see the spare parts lists for the FXM-N and FXM/EJ-N respectively:

 di-pro-polishing-machine

 di-pro-polishing-machine

Share This:
Facebookgoogle_pluslinkedinmail