Air Driven Di-PRO® Machine – Mark II

The Air Driven Di-PRO® machine type FXL-N has a built-in air-motor and should be driven by compressed and oil mist lubricated air. PLEASE NOTE! The built-in air-motor may be damaged, if operated with un-lubricated air. di-pro-polishing--machine

Connection: The Diprofil quick coupling HSL-M and fog lubrication unit MFB should be used for connection to your compressed air system. PLEASE NOTE! Protect the air inlet from dust and dirt, when not in operation.

The air-driven Di-PRO® machine is available with a Ø 6,4 mm tool-holder.

Technical Data

Item No. FXL-N

Speed (maximum): 7.000 rpm
Speed (recommended): 5.000 – 6.000 rpm
Stroke length: 0 – 6 mm (recommended 0,5 – 3 mm) NOTE! At stroke lengths exceeding 4 mm a maximum speed of 5.000 rpm is recommended.
Tool-holder: Ø 6,4 mm (suitable for tool shanks Ø 2 – Ø 6,4 mm).
Weight of inserted tool: Maximum 34 g. Recommended 1-15 g.
Machine Weight: 920 g
Applied feed force: 2-12 N (depending on inserted tool type and dimension).
Oil consumption: minimum 30 mm³/min. at maximum speed (about 2 drops/min.)
Air pressure: 4 bar (57 psi)
Air consumption: Approx. 60 l/min at 7.000 rpm
Noise level: not exceeding 75 dB(A) at 7.000 rpm
Vibration levels: Please see page 17 in the operation guide.

For more information about vibration levels when using certain tools at different speeds and stroke lengths, please see the corresponding operation guide. Frequency weighed hand/arm vibration principally in accordance with ISO 28927-8.

Click on the image below to see the spare parts list for Item No. FXL-N:

Di-PRO-polishing-machine

Share This:
Facebookgoogle_pluslinkedinmail